The afterglow is up to 8 hours.
These small pigments are the basic material for each afterglow - so you can craft your own very inexpensive fluorescent paint.
To your needs so-called color base materials for binding and which can also be a normal wallpaper paste.
Better to be safe is an acrylic-based clear coat.
This transfer fluids are used solvent-free and mostly indoors.
250g - 300g for approximately 1 liter of paint, but the intensity so you can decide for yourself.
Not finished in color (eg white paint) mix!,
since they already contain pigments and luminance affect or cancel
To get bold colors should be primed white ground
The paint must be stirred well before and during processing also stir occasionally
The colors are applicable depending on the carrier material in the interior as well as exterior, in which case the type of paint (dispersion () water soluble, synthetic resin (solvent)) must be observed
To protect the paint from the weather, it should be sealed as soon as you complete drying varnish
The pigments according to the manufacturer based on strontium aluminate (SrAl2O4). The crystal lattice is doped with europium, which serves as an activator for the optical effect. Other rare metals are used as co-activators.
Strontium does not contain any radioactive material and non-toxic.
Container sizes:
25g - 50g - 100g - 250g - 500g - 1000g
For use in the outdoor area, which requires a longer shelf life and resistance to environmental influences, we recommend the use of solvent-based carrier fluids (synthetic paints).
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
